EZGO MPT 800 (2011-2012) 48V Lithium Battery Conversion Kit — Fleet Lithium
EZGO MPT 800 (2011-2012) 48V Lithium Battery Conversion Kit — Fleet Lithium - 51V 168Ahis backordered and will ship as soon as it is back in stock.
10-Year Warranty / 5,000+ Cycles
10-Year Warranty / 5,000+ Cycles
Built for the long haul. Every Promise-series battery is backed by a 10-year manufacturer's warranty and rated for 5,000+ cycles at 80% depth of discharge. View full warranty details.
Product Highlights
Product Highlights
Upgrade Your E-Z-GO MPT 800 to Fleet Lithium
An MPT 800 earns its keep hauling tools and material, and the six 8V flooded pack is the part that quits first — usually mid-shift, usually loaded. A 51V Fleet Lithium pack holds full torque to the end of the charge, drops roughly 230 lb off the payload budget, and eliminates the watering routine that never actually gets done on a work vehicle.
Choose Your Capacity
| Capacity | Range* | Best For |
|---|---|---|
| 51V 65Ah | Up to 27 mi | Stock carts only |
| 51V 105Ah | Up to 50 mi | Daily driving |
| 51V 168Ah | Up to 75 mi | All-day use |
| 51V 210Ah | Up to 90 mi | Max range, fleet use |
65Ah is for stock motors and controllers only. If your cart is lifted, loaded, or running an upgraded motor or controller, start at 105Ah.
What's Included
- 51V NexGen Fleet Lithium LiFePO4 Battery (selected capacity)
- CH5618 — 58.4V 18A LiFePO4 Smart Charger
- Vehicle-specific mounting bracket kit — matched to your cart's factory battery tray
- AC0219 — AC Power Connector
- Cable Set
- Digital State-of-Charge Gauge
- All mounting hardware
Key Specs
- 300A NexGen BMS with 800A peak surge
- Patent-pending fire suppression system
- Built-in cold-weather heater — activates automatically below 32°F (standard, not an add-on)
- Bluetooth monitoring — voltage, temp and cycle count from your phone
- 10-year warranty — designed and assembled in the USA
Fitment Guide
| OEM Model | Years | Factory Battery Tray | Bracket Shipped |
|---|---|---|---|
| E-Z-GO MPT 800 | 2011–2012 | 6x 8V | Matched to your tray |
Which Do You Have?
This kit is for the 48V MPT 800 with six 8V batteries. Earlier 36V MPT 800 vehicles are not covered.
Will It Work With My Controller?
The MPT 800's Curtis 1206HB 48V SepEx controller runs the 51V Fleet pack directly. No reprogramming.
Frequently Asked Questions
Will this fit my MPT 800?
Yes, for the 2011-2012 48V six 8V generation.
Does it fit a 36V MPT 800?
No — that is an earlier system voltage.
Which capacity for work duty?
105Ah minimum. Choose 168Ah or 210Ah if the vehicle runs a full shift loaded.
How long does installation take?
30–60 minutes with basic hand tools.
Does it work in cold weather?
Yes. The built-in heater activates automatically below 32°F — standard on every pack.
*Range estimates are maximums under ideal conditions (flat terrain, single rider, 12–15 mph, 70°F). Actual range varies with terrain, weight, speed, and temperature.
Electrical & Performance
- Factory Pack Voltage
Battery & BMS
- Battery Technology
- Battery Type
- EV Battery Type
- BMS Features
- 300A Continuous / 800A Peak Surge Discharge , Advanced Battery Management System (BMS) , Internal Heating for Cold Temp Charging , Active Cell Balancing for Extended Life Cycle
- Safety Features
- Thermal Regulation (Heated Cells) , Low Voltage Disconnect (LVD) , Over Charge / Discharge Protection , Over Current Protection
- Battery Features
- Operating Temperature
- Charging: 32 to 140 ºF (0 to 60 ºC) , Discharging: -4 to 149 ºF (-20 to 65 ºC) , Storage: 50 to 113 ºF (10 to 45 ºC)
Warranty & Compliance
- Certifications
- UL 1642 , UL 1973 , CE , RoHS , UN38.3 , IP67
- Standards
- Condition
- Manufacturer Relationship
Product Details
- Classification
- Colour / Finish
- Vendor
- Fleet Lithium
- Product Type
- Lithium Battery Conversion Kit
- SKU
- EZMPT-51168
- Shipping Weight
- 177.0 lb






