Bintelli Beyond (All Years) (48V) Fleet Lithium Conversion Kit
Bintelli Beyond (All Years) (48V) Fleet Lithium Conversion Kit - 51V 65Ahis backordered and will ship as soon as it is back in stock.
Bintelli Beyond installation guide and manual
Plan your compatible 48V lead-acid conversion with real before photos, original diagrams and the Fleet commissioning checklist. Battery count varies by vehicle; confirm the entire bank and voltage labels. The 210Ah option uses two matched 105Ah packs in parallel.
Download the Bintelli Beyond installation manual (PDF)
Read the Bintelli Beyond lithium conversion guide · Browse installation downloads
The current kit list does not separately identify a replacement 12V reducer. Verify your existing converter input range, load rating and enable wiring before reuse. Nexus, Nemesis and factory-lithium replacements need separate fitment instructions.
Upgrade Your Bintelli Beyond to Fleet Lithium
Replace the factory lead-acid batteries in your Bintelli Beyond with your selected 51V LiFePO4 configuration from Fleet Lithium. Complete conversion kit — battery, charger, bracket, cables, and all hardware included.
Choose Your Capacity
| Capacity | Range | Best For |
|---|---|---|
| 51V 65Ah | Up to 27 mi | Stock carts only |
| 51V 105Ah | Up to 50 mi | Daily driving, golf |
| 51V 168Ah | Up to 75 mi | All-day use |
| 51V 210Ah | Up to 90 mi | Max range, fleet use |
65Ah is for stock motors/controllers only. If your cart has performance upgrades, choose 105Ah or higher.
What's Included
- 51V NexGen Fleet Lithium LiFePO4 Battery (selected capacity)
- CH5618 — 58.4V 18A LiFePO4 Smart Charger
- BR1324 — Bintelli Beyond Bracket Kit
- AC0219 — AC Power Connector
- CB0917 — Cable Set (35.4")
- Digital State-of-Charge Gauge
- All mounting hardware
Key Specs
- 300A NexGen BMS with 800A peak surge
- Patent-pending fire suppression system
- Built-in cold-weather heater — activates automatically below 32°F (standard, not an add-on)
- Bluetooth monitoring — voltage, temp, cycle count from your phone
- 10-year warranty — designed and assembled in the USA
Fitment Guide
| OEM | Model | Years | Factory Voltage |
|---|---|---|---|
| Bintelli | Beyond 2 | All Years | 48V |
| Bintelli | Beyond 4 | All Years | 48V |
| Bintelli | Beyond 6 | All Years | 48V |
Controller Compatibility
Bintelli Beyond models use a factory 48V AC controller. Verify the exact controller model and calibration for your selected Fleet pack. Preserve regenerative braking and protection settings; any required changes must follow an approved vehicle-specific specification.
Will this fit my Bintelli Beyond?
The BR1324 is the listed Beyond mounting kit. Confirm your battery tray and selected pack arrangement against the supplied fitting instructions before installation. This guide covers compatible 48V lead-acid conversions; factory-lithium replacements require a separate interface check.
Does my controller need reprogramming?
Check the controller label and installed calibration for the selected battery. Do not disable regenerative braking or raise voltage/current protection limits as a general conversion step.
How long does installation take?
Allow time for battery removal, tray inspection, wiring identification, mounting, charging and commissioning. Vehicle condition and required interfaces determine the work involved.
Does it work in cold weather?
Yes. Built-in heater activates automatically below 32°F — standard on every pack.
*Range estimates are maximums under ideal conditions (flat terrain, single rider, 12–15 mph, 70°F). Actual range varies with terrain, weight, speed, and temperature.
Quick answer: the Bintelli Beyond (All Years) (48V) Fleet Lithium Conversion Kit from Fleet Lithium has nominal voltage 51.2V, capacity 105 AH, continuous / peak discharge 300A continuous / 800A peak surge, cycle life 5,000+ cycles at 80% Depth of Discharge (DoD), cell chemistry Lithium iron phosphate (LiFePO4), warranty 10 Year Warranty. The complete specification table for this configuration is below.
Electrical & Performance
- Nominal Voltage
- Factory Pack Voltage
- Capacity
- Nominal Energy
- Continuous / Peak Discharge
- Charging Voltage
- Charging Current
- Discharge Cutoff Voltage
- Cycle Life
Battery & BMS
- Cell Chemistry
- Battery Type
- EV Battery Type
- BMS Features
- 300A Continuous / 800A Peak Surge Discharge , Advanced Battery Management System (BMS) , Internal Heating for Cold Temp Charging , Active Cell Balancing for Extended Life Cycle , Built in Fire Extinguisher for Ultimate Safety
- Safety Features
- Thermal Regulation (Heated Cells) , Low Voltage Disconnect (LVD) , Over Charge / Discharge Protection , Over Current Protection
- Battery Features
- EV Battery Features
- Operating Temperature
- Charging: 32 to 140 ºF (0 to 60 ºC) , Discharging: -4 to 149 ºF (-20 to 65 ºC) , Storage: 50 to 113 ºF (10 to 45 ºC)
Dimensions & Weight
- Dimensions (L x W x H)
- Weight
- 97.0 lb
Fitment & Compatibility
- Make
- Model
- Model Number
- Motor Controller
Warranty & Compliance
- Warranty
- Certifications & Standards
- UL 1642, UL 1973, CE, RoHS, UN 38.3, IP67
- Condition
- Manufacturer Relationship
Product Details
- Classification
- Colour / Finish
- Vendor
- Fleet Lithium
- Product Type
- Lithium Battery Conversion Kit
- SKU
- BI1324-5165





